Pushed to extremes: distinct effects of high temperature versus pressure on the structure of STEP.

Protein function hinges on small shifts of three-dimensional structure. Elevating temperature or pressure may provide experimentally accessible insights into such shifts, but the effects of these distinct perturbations on protein structures have not been compared in atomic detail. To quantitatively explore these two axes, we report the first pair of structures at physiological temperature versus. high pressure for the same protein, STEP (PTPN5). We show that these perturbations have distinct and surprising effects on protein volume, patterns of ordered solvent, and local backbone and side-chain conformations. This includes interactions between key catalytic loops only at physiological temperature, and a distinct conformational ensemble for another active-site loop only at high pressure. Strikingly, in torsional space, physiological temperature shifts STEP toward previously reported active-like states, while high pressure shifts it toward a previously uncharted region. Altogether, our work indicates that temperature and pressure are complementary, powerful, fundamental macromolecular perturbations.

Pushed to extremes: distinct effects of high temperature vs. pressure on the structure of an atypical phosphatase.

Protein function hinges on small shifts of three-dimensional structure. Elevating temperature or pressure may provide experimentally accessible insights into such shifts, but the effects of these distinct perturbations on protein structures have not been compared in atomic detail. To quantitatively explore these two axes, we report the first pair of structures at physiological temperature vs. high pressure for the same protein, STEP (PTPN5). We show that these perturbations have distinct and surprising effects on protein volume, patterns of ordered solvent, and local backbone and side-chain conformations. This includes novel interactions between key catalytic loops only at physiological temperature, and a distinct conformational ensemble for another active-site loop only at high pressure. Strikingly, in torsional space, physiological temperature shifts STEP toward previously reported active-like states, while high pressure shifts it toward a previously uncharted region. Together, our work argues that temperature and pressure are complementary, powerful, fundamental macromolecular perturbations.

Crystal structure of the pheromone Er-13 from the ciliate Euplotes raikovi, with implications for a protein-protein association model in pheromone/receptor interactions.

In the ciliate Euplotes raikovi, water-borne protein pheromones promote the vegetative cell growth and mating by competitively binding as autocrine and heterologous signals to putative cell receptors represented by membrane-bound pheromone isoforms. A previously determined crystal structure of pheromone Er-1 supported a pheromone/receptor binding model in which strong protein-protein interactions result from the cooperative utilization of two distinct types of contact interfaces that arrange molecules into linear chains, and these into two-dimensional layers. We have now determined the crystal structure of a new pheromone, Er-13, isolated from cultures that are strongly mating reactive withculturessource of pheromone Er-1.The comparison between the Er-1 and Er-13 crystal structuresreinforces the fundamental of the cooperative model of pheromone/receptor binding, in that the molecules arrange into linear chains taking a rigorously alternate opposite orientation reflecting the presumed mutual orientation of pheromone and receptor molecules on the cell surface. In addition, the comparison provides two new lines of evidence for a univocal rationalization of observations on the differentbehaviourbetween the autocrine and heterologous pheromone/receptor complexes. (i) In the Er-13 crystal, chains do not form layers which thus appear to be an over-structureunique tothe Er-1 crystal, not essential for the pheromone signalling mechanisms. (ii) In both crystal structures, the intra-chain interfaces are equally derived from burying amino-acid side-chains mostly residing on helix-3 of the three-helical pheromonefold. This helix is thus identified as the key structural motif underlying the pheromone activity, in line with its tight intra- and interspecificstructuralconservation.

Integrated sample-handling and mounting system for fixed-target serial synchrotron crystallography.

Serial synchrotron crystallography (SSX) is enabling the efficient use of small crystals for structure-function studies of biomolecules and for drug discovery. An integrated SSX system has been developed comprising ultralow background-scatter sample holders suitable for room and cryogenic temperature crystallographic data collection, a sample-loading station and a humid `gloveless' glovebox. The sample holders incorporate thin-film supports with a variety of designs optimized for different crystal-loading challenges. These holders facilitate the dispersion of crystals and the removal of excess liquid, can be cooled at extremely high rates, generate little background scatter, allow data collection over >90° of oscillation without obstruction or the risk of generating saturating Bragg peaks, are compatible with existing infrastructure for high-throughput cryocrystallography and are reusable. The sample-loading station allows sample preparation and loading onto the support film, the application of time-varying suction for optimal removal of excess liquid, crystal repositioning and cryoprotection, and the application of sealing films for room-temperature data collection, all in a controlled-humidity environment. The humid glovebox allows microscope observation of the sample-loading station and crystallization trays while maintaining near-saturating humidities that further minimize the risks of sample dehydration and damage, and maximize working times. This integrated system addresses common problems in obtaining properly dispersed, properly hydrated and isomorphous microcrystals for fixed-orientation and oscillation data collection. Its ease of use, flexibility and optimized performance make it attractive not just for SSX but also for single-crystal and few-crystal data collection. Fundamental concepts that are important in achieving desired crystal distributions on a sample holder via time-varying suction-induced liquid flows are also discussed.

Fixed-target serial oscillation crystallography at room temperature.

A fixed-target approach to high-throughput room-temperature serial synchrotron crystallography with oscillation is described. Patterned silicon chips with microwells provide high crystal-loading density with an extremely high hit rate. The microfocus, undulator-fed beamline at CHESS, which has compound refractive optics and a fast-framing detector, was built and optimized for this experiment. The high-throughput oscillation method described here collects 1-5° of data per crystal at room temperature with fast (10°â€…s-1) oscillation rates and translation times, giving a crystal-data collection rate of 2.5 Hz. Partial datasets collected by the oscillation method at a storage-ring source provide more complete data per crystal than still images, dramatically lowering the total number of crystals needed for a complete dataset suitable for structure solution and refinement - up to two orders of magnitude fewer being required. Thus, this method is particularly well suited to instances where crystal quantities are low. It is demonstrated, through comparison of first and last oscillation images of two systems, that dose and the effects of radiation damage can be minimized through fast rotation and low angular sweeps for each crystal.

Charge-Transfer Salts of 6,6-Dicyanopentafulvenes: From Topology to Charge Separation in Solution.

6,6-Dicyanopentafulvene derivatives and metallocenes with redox potentials appropriate for forming their radical anions form highly persistent donor-acceptor salts. The charge-transfer salts of 2,3,4,5-tetraphenyl-6,6-dicyanofulvene with cobaltocene (1⋅Cp2 Co) and 2,3,4,5-tetrakis(triisopropylsilyl)-6,6-dicyanofulvene with decamethylferrocene (2⋅Fc*) have been prepared. The X-ray structures of the two salts, formed as black plates, were obtained and are discussed herein. Compared with neutral dicyanopentafulvenes, the chromophores in the metallocene salts show substantial changes in bond lengths and torsional angles in the solid state. EPR, NMR, and optical spectroscopy, as well as superconducting quantum interference device (SQUID) measurements, reveal that charge-separation in the crystalline states and in frozen and fluid solutions depends on subtle differences of redox potentials, geometry, and on ion pairing. Whereas 1⋅Cp2 Co reveals paramagnetic character in the crystalline state and in solution, compound 2⋅Fc* shows a delicate balance between para- and diamagnetism, depending on the temperature and solvent characteristics.

Unconventional Synthesis of a CuI Rotaxane with a Superacceptor Stopper: Ultrafast Excited-State Dynamics and Near-Infrared Luminescence.

A CuI bis-phenanthroline rotaxane was prepared by using the [2+2] cycloaddition-retroelectrocyclization (CA-RE) reaction to graft a bulky dicyanoquinodimethane (DCNQ) stopper. The electronic properties were investigated with electrochemical and photophysical techniques, in parallel with three reference compounds, namely, the DCNQ derivative alone, the DCNQ-based phenanthroline ligand, and an analogue CuI complex lacking the DCNQ moiety. In all the systems containing the DCNQ unit, the lowest electronic excited states are centered thereon, with the singlet level (S1 ) located at about 1.0 eV, as suggested by TDDFT calculations. Accordingly, in the DCNQ-equipped rotaxane, the typical metal-to-ligand charge-transfer luminescence of the CuI center is totally quenched. Ultrafast transient absorption and emission studies show that, in the rotaxane, the final sink of photoinduced processes is the lowest singlet state of the DCNQ moiety (S1 ), which exhibits strong charge-transfer character and a lifetime of 0.4 ps. Its deactivation leads to population of another excited state with a lifetime of 1.3 ps, which can be the related triplet state (T1 ) or a vibrationally hot level (hot-S0 ). Notably, S1 also shows stimulated fluorescence in the near-infrared (NIR) region between 1100 and 1500 nm, corroborating the TDDFT prediction. This unusual finding opens up the study of ultrashort-lived NIR luminescence in organic donor-acceptor systems.

The reductive aromatization of tridecacyclene.

The radical anion and dianion of tridecacyclene (C48H24, 1) have been prepared by reduction with potassium metal. Analysis of the solid-state structure of the dipotassium salt of the dianion (3) reveals evidence of increased aromatic character within the structure's central 8-membered ring despite preservation of the tub-like shape inherent to its neutral parent.

Pentaindenocorannulene: Properties, Assemblies, and C60 Complex.

Pentaindenocorannulene (C50 H20 , 1), a deep bowl polynuclear aromatic hydrocarbon, accepts 4 electrons, crystallizes in columnar bowl-in-bowl assemblies and forms a nested C60 @12 complex. Spectra, structures and computations are presented.

EIGER detector: application in macromolecular crystallography.

The development of single-photon-counting detectors, such as the PILATUS, has been a major recent breakthrough in macromolecular crystallography, enabling noise-free detection and novel data-acquisition modes. The new EIGER detector features a pixel size of 75 × 75 µm, frame rates of up to 3000 Hz and a dead time as low as 3.8 µs. An EIGER 1M and EIGER 16M were tested on Swiss Light Source beamlines X10SA and X06SA for their application in macromolecular crystallography. The combination of fast frame rates and a very short dead time allows high-quality data acquisition in a shorter time. The ultrafine ϕ-slicing data-collection method is introduced and validated and its application in finding the optimal rotation angle, a suitable rotation speed and a sufficient X-ray dose are presented. An improvement of the data quality up to slicing at one tenth of the mosaicity has been observed, which is much finer than expected based on previous findings. The influence of key data-collection parameters on data quality is discussed.

Design and Synthesis of Aviram-Ratner-Type Dyads and Rectification Studies in Langmuir-Blodgett (LB) Films.

The design and synthesis of Aviram-Ratner-type molecular rectifiers, featuring an anilino-substituted extended tetracyanoquinodimethane (exTCNQ) acceptor, covalently linked by the σ-spacer bicyclo[2.2.2]octane (BCO) to a tetrathiafulvalene (TTF) donor moiety, are described. The rigid BCO spacer keeps the TTF donor and exTCNQ acceptor moieties apart, as demonstrated by X-ray analysis. The photophysical properties of the TTF-BCO-exTCNQ dyads were investigated by UV/Vis and EPR spectroscopy, electrochemical studies, and theoretical calculations. Langmuir-Blodgett films were prepared and used in the fabrication and electrical studies of junction devices. One dyad showed the asymmetric current-voltage (I-V) curve characteristic for rectification, unlike control compounds containing the TTF unit but not the exTCNQ moiety or comprising the exTCNQ acceptor moiety but lacking the donor TTF part, which both gave symmetric I-V curves. The direction of the observed rectification indicated that the preferred electron current flows from the exTCNQ acceptor to the TTF donor.

Data-collection strategy for challenging native SAD phasing.

Recent improvements in data-collection strategies have pushed the limits of native SAD (single-wavelength anomalous diffraction) phasing, a method that uses the weak anomalous signal of light elements naturally present in macromolecules. These involve the merging of multiple data sets from either multiple crystals or from a single crystal collected in multiple orientations at a low X-ray dose. Both approaches yield data of high multiplicity while minimizing radiation damage and systematic error, thus ensuring accurate measurements of the anomalous differences. Here, the combined use of these two strategies is described to solve cases of native SAD phasing that were particular challenges: the integral membrane diacylglycerol kinase (DgkA) with a low Bijvoet ratio of 1% and the large 200 kDa complex of the CRISPR-associated endonuclease (Cas9) bound to guide RNA and target DNA crystallized in the low-symmetry space group C2. The optimal native SAD data-collection strategy based on systematic measurements performed on the 266 kDa multiprotein/multiligand tubulin complex is discussed.

Crystal structures of three complexes of zinc chloride with tri-tert-butyl-phosphane.

Under anhydrous conditions and in the absence of a Lewis-base solvent, a zinc chloride complex with tri-tert-butyl-phosphane as the µ-bridged dimer is formed, viz. di-µ-chlorido-bis-[chlorido-bis-(tri-tert-butyl-phosphane)zinc], [ZnCl4(C12H27P)2], (1), which features a nearly square-shaped (ZnCl)2 cyclic core and whose Cl atoms inter-act weakly with C-H groups on the phosphane ligand. In the presence of THF, monomeric di-chlorido-(tetra-hydro-furan-κO)(tri-tert-butyl-phosphane-κP)zinc, [ZnCl2(C4H8O)(C12H27P)] or [P(tBu3)(THF)ZnCl2], (2), is formed. This slightly distorted tetra-hedral Zn complex has weak C-H⋯Cl inter-actions between the Cl atoms and phosphane and THF C-H groups. Under ambient conditions, the hydrolysed complex tri-tert-butyl-phospho-nium aqua-tri-chlorido-zincate 1,2-di-chloro-ethane monosolvate, (C12H28P)[ZnCl3(H2O)]·C2H4Cl2 or [HPtBu3](+) [(H2O)ZnCl3](-)·C2H4Cl2, (3), is formed. This complex forms chains of [(H2O)ZnCl3](-) anions from hydrogen-bonding inter-actions between the water H atoms and Cl atoms that propagate along the b axis.

Tridecacyclene: A Cyclic Tetramer of Acenaphthylene.

In this manuscript, we describe the single-step preparation of a cyclic tetramer of acenaphthylene through a Lewis acid-catalyzed aldol cyclization of 1-acenaphthenone. The previously unexplored cyclic tetramer material differs from the better-known cyclic trimer, decacyclene, due to the presence of a central eight-membered ring. This ring not only forces the molecule to distort significantly from planarity, but is also responsible for its unique electronic properties, including a decrease in the reduction potential (by about 0.4 eV) and optical gap (by about 0.73 eV), compared to the more planar decacyclene. The synthesized compound crystallizes into a unique packing structure with significant π-stacking observed between adjacent molecules. Furthermore, due to its saddle-like shape, the cyclic tetramer is able to form shape-complementary interactions between its concave surface and the convex outer surface of buckminsterfullerene to generate cocrystalline supramolecular assemblies.

An enantioselective artificial Suzukiase based on the biotin-streptavidin technology.

Introduction of a biotinylated monophosphine palladium complex within streptavidin affords an enantioselective artificial Suzukiase. Site-directed mutagenesis allowed the optimization of the activity and the enantioselectivity of this artificial metalloenzyme. A variety of atropisomeric biaryls were produced in good yields and up to 90% ee. The hybrid catalyst described herein shows comparable TOF to the previous aqueous-asymmetric Suzuki catalysts, and excellent stability under the reaction conditions to realize higher TON through longer reaction time.

Advanced Crystallographic Data Collection Protocols for Experimental Phasing.

Experimental phasing by single- or multi-wavelength anomalous dispersion (SAD or MAD) has become the most popular method of de novo macromolecular structure determination. Continuous advances at third-generation synchrotron sources have enabled the deployment of rapid data collection protocols that are capable of recording SAD or MAD data sets. However, procedural simplifications driven by the pursuit of high throughput have led to a loss of sophistication in data collection strategies, adversely affecting measurement accuracy from the viewpoint of anomalous phasing. In this chapter, we detail optimized strategies for collecting high-quality data for experimental phasing, with particular emphasis on minimizing errors from radiation damage as well as from the instrument. This chapter also emphasizes data processing for "on-the-fly" decision-making during data collection, a critical process when data quality depends directly on information gathered while at the synchrotron.

Anilino-Substituted Multicyanobuta-1,3-diene Electron Acceptors: TICT Molecules with Accessible Conical Intersections.

A theoretical investigation based on DFT, TD-DFT, and CASSCF/CASPT2 methods has been carried out to elucidate the photophysics of two anilino-substituted pentacyano- and tetracyanobuta-1,3-dienes (PCBD and TCBD, respectively). These molecules exhibit exceptional electron-accepting properties, but their effective use in multicomponent systems for photoinduced electron transfer is limited because they undergo ultrafast (∼1 ps) radiationless deactivation. We show that the lowest-energy excited states of these molecules have a twisted intramolecular charge-transfer character and deactivate to the ground state through energetically accessible conical intersections (CIs). The topology of the lowest-energy CI, analyzed with a linear interpolation of the two branching-space vectors (g and h), indicates it is a sloped CI, ultimately responsible for the ultrafast deactivation of this class of compounds.

The [2 + 2] Cycloaddition-Retroelectrocyclization and [4 + 2] Hetero-Diels-Alder Reactions of 2-(Dicyanomethylene)indan-1,3-dione with Electron-Rich Alkynes: Influence of Lewis Acids on Reactivity.

The reaction of electrophilic 2-(dicyanomethylene)indan-1,3-dione (DCID) with substituted, electron-rich alkynes provides two classes of push-pull chromophores with interesting optoelectronic properties. The formal [2 + 2] cycloaddition-retroelectrocyclization reaction at the exocyclic double bond of DCID gives cyanobuta-1,3-dienes, and the formal [4 + 2] hetero-Diels-Alder (HDA) reaction at an enone moiety of DCID generates fused 4H-pyran heterocycles. Both products can be obtained in good yield and excellent selectivity by carefully tuning the reaction conditions; in particular, the use of Lewis acids dramatically enhances formation of the HDA adduct.

The 6,6-dicyanopentafulvene core: a template for the design of electron-acceptor compounds.

The electron-accepting ability of 6,6-dicyanopentafulvenes (DCFs) can be varied extensively through substitution on the five-membered ring. The reduction potentials for a set of 2,3,4,5-tetraphenyl-substituted DCFs, with varying substituents at the para-position of the phenyl rings, strongly correlate with their Hammett σp-parameters. By combining cyclic voltammetry with DFT calculations ((U)B3LYP/6-311+G(d)), using the conductor-like polarizable continuum model (CPCM) for implicit solvation, the absolute reduction potentials of a set of twenty DCFs were reproduced with a mean absolute deviation of 0.10 eV and a maximum deviation of 0.19 eV. Our experimentally investigated DCFs have reduction potentials within 3.67-4.41 eV, however, the computations reveal that DCFs with experimental reduction potentials as high as 5.3 eV could be achieved, higher than that of F4-TCNQ (5.02 eV). Thus, the DCF core is a template that allows variation in the reduction potentials by about 1.6 eV.

Push-Pull Buta-1,2,3-trienes: exceptionally low rotational barriers of cumulenic C=C bonds and proacetylenic reactivity.

A variety of asymmetrically donor-acceptor-substituted [3]cumulenes (buta-1,2,3-trienes) were synthesized by developed procedures. The activation barriers to rotation ΔG(≠) were measured by variable temperature NMR spectroscopy and found to be as low as 11.8 kcal mol(-1) , in the range of the barriers for rotation around sterically hindered single bonds. The central C=C bond of the push-pull-substituted [3]cumulene moiety is shortened down to 1.22 Šas measured by X-ray crystallography, leading to a substantial bond length alternation (BLA) of up to 0.17 Å. All the experimental results are supported by DFT calculations. Zwitterionic transition states (TS) of bond rotation confirm the postulated proacetylenic character of donor-acceptor [3]cumulenes. Additional support for the proacetylenic character of these chromophores is provided by their reaction with tetracyanoethene (TCNE) in a cycloaddition-retroelectrocyclization (CA-RE) cascade characteristic of donor-polarized acetylenes.